Adjustable Ball Joints
Ball joints are designed to join the steering knuckles to the control arms, and it is covered by a protective steel casing that is specifically intended to make sure that the dirt and grime that contaminate your vehicle's underbody does not work its way into the ball joint and cause unnecessary damage. The difference between a normal ball joint and adjustable ball joints is the fact that the adjustable factor allows for this to work in vehicles with suspensions that have been altered from its original state. Often times this is a problem when the suspension in a vehicle is lowered.
The reason that adjustable ball joints need to be used with a lowered suspension is that it gives the owner of the vehicle the ability to adjust the breakaway torque so that it can be set as low as it needs to be in order to make sure that the automobile has fully responsive steering and is operating at its best. In fact, when a vehicle is lowered, it often means that the chassis height has been changed in a manner that is beyond the capabilities of the factory specifications for the original ball joint system.
By using adjustable ball joints you can be sure that you are doing everything possible to equalize the proper wheel camber. Doing this will enable the steering system to function correctly as the ball joints will be able to pivot in a manner that will allow you the handling capabilities that you need in your automobile to make sure that it is operating safely and efficiently. In order to do this you have to use the adjustable ball joints so that you can be sure that the parts meet correctly underneath the lowered chassis system. Using regular ball joints can cause unnecessary strain and problems on the system and it can break or cause other issues, facilitating problematic repairs.
So, if you are someone who is considering lowering their vehicle, then you will want to make sure that you look into using adjustable ball joints. With the necessary corrections in its design it works to help your vehicle stay in top shape even though you will be lowering it past a level that is considered safe for the traditional ball joints. After all, cars are not designed with the idea that people would want to be able to go into the vehicle and modify its height and design. This is something that is generally done by car enthusiasts on their own time, and because of this you will most likely have to use aftermarket parts in order to achieve your goals.
If you want to make sure that you are installing the adjustable ball joints correctly then you will want to double check all of the instructions so that you can assemble it in a manner that will be both correct and safe. Since you are going to be dealing with a primary function of your vehicle (the steering system) it is important that you are certain that all of the parts get installed correctly and are functioning on a level that will ensure your safety.
It is possible that if you do not feel safe installing the adjustable ball joints that you could ask a specialist to put them in for you so that you can make sure that they are functioning correctly. Then not only would you have a great vehicle that has been lowered to your specifications, but you could be sure that the ball joints would support the steering system in a manner that would guarantee your safety.
