Hub Unit Bearing

Installing new hub unit bearings is actually a relatively easy process to execute if you follow the instructions carefully. However, if you feel unconfident, or uncomfortable at the thought of changing hub unit bearings yourself, then it is best to take your car to a certified mechanic who will do this for you. This will cost you extra, possibly a lot extra, but it is better to be safe than sorry when it comes to changing or replacing things on your car. Let’s take a look at a rough guide on how to replace hub unit bearings.

Firstly, you are going to need to jack up the front of the car. If you are going to do this then it is advisable to block the tires that are opposite to the ones that you are working on. You can do this with a brick or any other suitable heavy object. You can then begin to loosen the lug nuts, and then remove the wheels. Once you have done this you are ready to remove the brake calipers. It is a good idea to make sure that you hang them out of the way so that you don’t cause any damage to yourself or the car.

Next, you are going to need to remove the dust cover that is in the middle of the wheel hub, in order to get access to the spindle nut. Once you have access to the spindle nut you can pull out the pin that is inserted through the middle of the spindle. The next thing that you need to do is to remove the brake rotor from the wheel hub. If it is attached with bolts then you will need to remove these first, but usually you will be able to remove it without having to fiddle with any nuts and bolts as not all cars will have them.

After you have removed the brake rotor, you are going to need to loosen the spindle nut. You should already have the tools to do this properly. If your car is a newer model then replacing the hub unit bearings is going to consist of removing and replacing the whole unit. However, if you have an older vehicle then the process is a little more complicated. Once you have successfully removed and replaced the old unit, you are ready to tighten the spindle nut again. That is basically all that you will need to do in order to replace hub unit bearings.

The cost that you can expect to pay for hub unit bearings is going to vary a lot. For older vehicles you can expect to pay a little less, but this is not true in all cases. As mentioned above, if you don’t feel one hundred percent sure that you know what you are doing when it comes to replacing hub unit bearings then it is wise to not attempt it. There are certified professionals who will charge a little extra, but who will also be able to make sure that your car is totally safe.

If you are looking to buy new hub unit bearings then the best place to start would be online. By doing this then you will be able to make sure that you are not getting ripped off, and also that you are buying from a reputable retailer. You can’t be too safe when it comes to automotives so it is a very good idea to make sure that you do everything properly. Most importantly, do your research about how to replace hub unit bearings properly, and get professional advice wherever possible.

Comments are closed.