Oil Cooler Adapter

Many vehicles can benefit from using an oil cooler adaptor because it allows the oil to be cooled and filtered between the point of the oil filter and engine block. This is a very important thing to utilize especially if the vehicle is in heavy use and oil temperatures will go up to levels which can be unsafe and even cause fires or engine damage. There are many different types of oil cooler adaptors available and some vehicles do not have the option to upgrade to an engine cooler adaptor due to the way that they are built. For those vehicles that do have the option, these oil cooler adapters can extend the life of the vehicle as well as provide better performance from the engine with only a small modification.

The most common oil cooler adapter models are of the sandwich type. They basically consist of some chambers where oil can be pressurized before being delivered to the engine block essentially lengthening the distance between the oil filter and the engine block. There are many ways to go about this but certain oil cooler adapters may simply not be compatible with certain vehicles. It is important to look into what options will indeed fit your application because oil cooler adapters are made to fit a broad selection of vehicles very easily. If you can install one of these performance enhancing options, make sure that you do it right or have a professional install it for you.

Having a new oil cooler adapter installation performed on a vehicle can become very difficult for those who do not know how to manage a job of this magnitude. Basically the installation must be done while the engine is cold and requires the jacking of a vehicle up to drain the existing oil, changing the current filter, installing the oil cooler adaptor as well as making some small modifications to the vehicle. This is then followed by refilling the vehicle with the appropriate amount of clean oil and running it to troubleshoot anything that may have gone wrong during the installation phase. In the event that the installation was not a success, a large mess may occur with oil going everywhere. It is important to get the help of professionals if the process was not possible manually.

Some vehicles may already have an oil cooler adapter in them and require a replacement due to several different factors. One of the most common problems that occur is the buildup of debris from unclean oil due to the use of an old filter or broken filter canister on the vehicle. The other most common problem is breakage due to high pressure or severe seismic activity such as going over bumpy roads and uneven surfaces that cause the part to vibrate and fissure. If this was to occur, the part must be replaced immediately to ensure that the vehicle does not undergo major damages. One of the main things that would happen is that the oil pressure would greatly reduce and the vehicle will simply not start properly.

Finding oil cooler adapter retailers is easily done online and can be ordered fairly quickly through the use of trusted parts manufacturers and dealers. These high quality oil cooler parts allow you to have an oil cooler adapter that will most likely be compatible with your vehicle. If replacing an already existing part, it may be best to look for the appropriate part from the same manufacturer to ensure that the vehicle continues to run smoothly. Properly following the installation procedures prevents accidental complications in the future!

Comments are closed.