Truck Roll Bars

There are quite a few benefits to having rolls bars on your truck; they will be able to cut down on the amount of sway that you experience while you are driving around corners, and it can be a serious issue for some larger vehicles. You will be able to find many different kinds of truck roll bars, so it is important to take all the time you need to make sure that you get the right ones for the vehicle that you have. These bars can also reduce over-steering which certain people can experience issues with depending on the type of truck they drive. Since a lot of the commercial roll bars are extremely pricey, it might be a good idea to think about some of the alternatives which you will be able to use in order to save money while still getting exactly what you want. Keep in mind that there will be a number of places to buy these as well, so you certainly do not have to settle for the first place you come across.

An increasing number of people are starting to purchase these roll bars for their trucks because they are commonly viewed as a necessary safety feature which will be able to prevent your vehicle from rolling over in the event of an accident or extremely sharp turn. With the right materials you will actually be able to make your own roll bars and put them on your truck. Although it is a somewhat involved process, it is certainly nothing that only experienced professionals can do. Even if you only have a little bit of experience working with automobiles, it might be a good idea to do it yourself so you can save a lot of money and still get the roll bars that you want for your truck. You will need to start by gathering all of the materials, including steel piping, pipe cutter, a vise, brace, drill, bending tool, and tape measure. Cumulatively all of these things will be able to help you make the perfect roll bars to keep you safe while driving on the road.

The very first step that you will need to go through is performing some basic measurements on your truck so you will be able to get the dimensions of the piping for the bars correct. It is extremely important that you are spot on with the accuracy of the tape measure so you will know exactly how much you need for the bars. You will need to measure both the interior and the exterior of the vehicle from the hood of it to the very bottom of the rear window. Then you will need to make sure to measure along the back of the vehicle. After you have got your measurements you will then need to start cutting the piping. Get the pipe and divide it into the lengths which you need for your specific vehicle, using a pipe cutter in order to get all the way through without damaging the ends in any way. Make sure the material you use for the pipes is durable and will last you a long time.

You will then need to bend the pipe by putting it in a brace and put the far end into a vise that there is exactly 2 ½ feet protruding from the vise. This is going to be the part which is referred to as the vent. Next you will take your welder and heat up the general area surrounding the vise and use a bending tool on the other end of it. You will have to bend the pipe as fast as possible into a 90 degree angle exactly. Keep repeating the process for the second pipe you are using.

Next you will need to build the actual roll bar by taking the metal bars and laying them out so that they are in an “L” shape. The shortest bar should be going to the opposite end. You will need to take the drill and push a screw through each of the pipes in the “L” shape so that eventually you will have an “8” shape. Take the short bars and put them on the ends of both the L-shaped bars and add each of the nuts to all of the screws. You will then be able to sand down the semi-finished roll bar and paint it whichever color you like before you finally put it on to your vehicle.

Comments are closed.